Taig Peatool Micro Mini Mill Lathe DRO Digital Read Out Cross Slide

Description

I have created the bracket set to mount a 4″ Digital Caliper to a Taig Micro Lathe. With it in place, you can adjust all the Gib screws. It is made with PETG Filament on my 3D Printer. The tangs have been cut off the calipers and 3M VHB Adhesive is used. The calipers are + or – 0.001″.
Fits ONLY the Late-Model Extruded Cross Slide assemblies. Will not fit the early Cast Cross Slide. Email picture of your Cross Slide if unsure.
A nice setup that does not get in the way of normal usage. Takes a minute or two to install. Zero drilling or fabrication needed. Even the Allens are Taig SAE-sized. Mounts into the Taig T-Slots. Removes just as fast if you need to disassemble your lathe for maintenance.
Video Below:
https://youtu.be/0x4A0J8TEWc